7
8
5.
Insert Buckle’s Metal
Retainer into Slot
Closest to Child
Buckle
MUST
face out.
You
MUST
use the 1st or 2nd
buckle slots when child restraint is
used rear facing.
Any slot can be used when
forward facing.
1
2
3
6.
Pull Metal Retainer
Completely Through
Pad and Shell
7.
Check Buckle
Pull up on buckle to make sure it
is secured.
The buckle
MUST
not pull out.
WARNING:
Failure to place buckle’s metal retainer
completely through pad and shell can result in serious
injury or death.
1.
Fully Loosen Harness
Straps
Push down on harness release
lever (through opening in pad)
while pulling out on harness
straps as shown.
continued on next page
3.
Pull Harness Strap Out
of Shoulder Harness
Slots
2.
From Back, Remove
Harness Strap Loops
From Splitter Plate
4.
Rethread Harness Strap
Into Correct Shoulder
Harness Slots For Your
Child
See page 5 for fi t guidelines.
Adjusting Headrest/Harness
Height
