Vehicle Belt Installation
40
39
WARNINGS:
Do not use the lower
anchor belt along with the vehicle lap
or lap/shoulder belt. Secure the lower
anchor hooks to storage attachments
as shown when installing with vehicle
belts.
Store the tether hook when used rear
facing. Attach the tether hook to stor-
age attachment as shown.
Check the vehicle belt before each use. Use only if the
belt can be tightened properly and locked securely in
place.
Failure to follow these warnings can result in serious
injury or death.
continued on next page
1.
Pull Down Recline
Stand to Unlock and
Fold It Under Child
Restraint
NOTE:
Loosely attach the tether
hook to storage location before
folding recline stand. Fold recline
stand and then gently tighten tether
strap to remove slack.
To Release Lower
Anchor Belt
Remove child from child restraint.
Remove tension from the lower anchor
belt by pushing down on side of child
restraint with the lower anchor belt
adjuster. Then press the adjuster but-
ton to loosen belt.
Unhook from anchor by squeezing
spring lever on hook, pushing hook
back into the seat bight, and twisting.
Then pull it out of the vehicle seat.
Store lower anchor belt when not
in use. See page 27.
