26
25
Do not use a child restraint or booster seat that has been in a
crash or a collision. The system must be replaced.
Do not use a child restraint or booster seat if you do not know
the history of the restraint.
Never take your child out of the child restraint or booster seat or
attend to the child’s needs while the vehicle is moving.
Never leave child unattended in the child restraint or booster
seat.
To avoid the child being seriously burned, always check for hot
seat and buckles before using this child restraint.
Do not use a child restraint or booster seat with missing or dam-
aged parts.
Do not lubricate the buckles, harness system or fasteners for
any reason.
DJG does not recommend the use of accessories or add-ons that
have not been certifi ed with this child restraint and booster seat
at original purchase date.
Never allow any child to play with this child restraint and booster
seat; it is not a toy.
Do not remove the warning labels.
This child restraint has been certifi ed for use in passenger
vehicles and aircraft. This booster seat has been certifi ed for use
in passenger vehicles only. Do not use in a boat, on a motorcycle
or in a cargo van or bus where there are no seat belts or tether
anchors. Do not modify for use as a crib or a swing. Do not leave
on stove top or any other hot surface.
On the side of the child restraint there is a date of manufacture
label. Do not use this child restraint more than 10 years after
date of manufacture.
Read all instructions and warning labels for additional warnings.
Installation in Vehicle
Check the vehicle belt or UAS belt before each use. Use only if
the belt is tightened properly and securely.
Child Restraint and Booster Seat Use
Buckle Cover
To remove buckle cover
, slide the ends
out of the slot in pad. Pull up and off of the
buckle.
Body Pillow
When using the lower shoulder harness
slots for smaller infants, you
MUST
use
the body pillow.
To remove this body pillow
, pull buckle
through the slot in pillow and slide pillow out
from behind the harness straps.
Or from the back of seat, remove harness strap loops from splitter
plate. From the front, pull harness straps out of shell and body pillow.
Pull buckle through slot in pillow. Rethread harness straps:
For lower
shoulder harness slots for smaller infants,
see pages 9-11.
For
upper shoulder harness slots,
see page 23.
continued on next page
Removable Cup Holder
To remove cup holder
, twist the cup
holder counterclockwise.
Pull out of slot in shell.
The cup holder is dishwasher safe.
To install cup holder
, align tabs on bot-
tom of cup holder with slots in shell. Twist
clockwise to lock in place.