24
23
Accessories on Select Models
Harness Covers
Harness covers help provide comfort to the
neck. If harness covers will not allow proper
positioning of the chest clip or interfere with
getting a tight enough fi t for a smaller baby,
remove and do not use.
Store until child is large enough to use these
harness covers while maintaining a properly
fi tting harness.
There are different harness cover styles
depending on your model.
To remove the harness covers with
fastening strips
, pull the fastening strips
apart and remove harness covers.
To remove harness covers without fastening strips
, unhook the
harness strap from splitter plate, pull harness strap out of the upper
harness slots and remove harness covers. Rethread harness strap and
attach the harness strap loops to the splitter plate.
Head Pillow
To remove head pillow,
gently pull tabs on
back of head pillow out of headrest pad.
To attach the head pillow
, slide the tabs
on back of head pillow into slots in headrest
pad.
sewn
end
4.
Attach 1st Harness Strap
Loops to Splitter Plate
As Shown
Sewn ends of the harness strap loops
MUST
face towards you.
DO NOT
twist harness strap or
harness adjustment strap.
Make sure the same harness strap
loops are fitted
COMPLETELY ON
both sides of the splitter plate.
Correct
2.
Thread Harness Straps
into Upper Shoulder Harness
Slots
If you will be using the lower shoulder
harness slots for smaller infants, see
pages 9-11.
WARNINGS:
Harness system must be installed correctly.
Failure to follow these steps can result in serious injury or death.
3.
From Back, Thread
Harness Straps OVER
Metal Bar
DO NOT
twist harness straps.
continued on next page
Body Pillow
When using the lower shoulder harness
slots for smaller infants, you
MUST
use
the body pillow.
To remove this body pillow,
slide pillow out
from behind the harness straps.