20
WARNINGS:
Do not use child restraint or booster seat
without the seat pad. Failure to do this can result in serious
injury or death.
Cleaning Pad and Accessories
Machine wash all pieces separately with cold water on a gentle cycle.
Make sure harness covers are closed so fastening strips are not
exposed. Do not use bleach. Tumble dry separately for 10-12 minutes
on low heat. Remove immediately.
Cleaning Harness Strap
Spot clean using warm sudsy water and damp cloth.
Replacing Pad
Adjust the headrest to the highest position. Starting from the bottom,
gently pull headrest pad onto headrest. Place elastic straps on head-
rest pad around headrest/harness adjustment levers. Slide harness
straps into slots in pad. Attach fasteners.
Starting from bottom of child restraint, slip pad on shell. Pull harness
adjustment strap through pad. Wrap pad around bottom and sides
of shell. Push harness holders through slots in pad. Push pad behind
headrest. Wrap around the top of shell. Slide harness straps into slots
in pad. Attach fasteners.
5.
Pull Headrest Pad Off
Bottom of Headrest
As Shown
Remove headrest pad from shell.
6.
Undo Fasteners on Seat
Pad As Shown
7.
Pull Pad Off Sides and
Bottom of Shell
8.
Pull Pad Down and
Off of Bottom of
Harness Holders
Pull up to remove completely.
9.
From the Top, Pull Pad
Off of Shell
19