Safety 1st Grow and Go ARB, Manual, Page: 38 / 42

1
2
3
sewn
end
Coutures à
l'extrémité
1
2
3
sewn
end
Coutures à
l'extrémité
Undo Fasteners on Seat
Pad and Pull Headrest Pad
Off Bottom of Headrest
Unthread harness straps from
slots on side of headrest.
Loosen harness straps.
Pull chest clip, harness straps,
and buckle tongues out from
behind the headrest and seat
pad.
Slide harness straps into slots in
headrest pad.
Attach seat pad fasteners.
1
2
3
sewn
end
Coutures à
l'extrémité
1
2
3
sewn
end
Coutures à
l'extrémité
Attach 1st Harness Strap
Loops to Splitter Plate As
Shown
70 69
Thread Harness Straps into
Upper Shoulder Harness
Slots
If you will be using the lower
shoulder harness slots for
smaller children, see pages
15-18.
The harness system must be installed correctly. Do
not use a child restraint with damaged harness straps.
From Back, Thread Harness
Straps OVER Metal Bar
Do not
twist harness straps.
3
1
2
3
sewn
end
Coutures à
l'extrémité
1
2
3
sewn
end
Coutures à
l'extrémité
4
Sewn ends of the harness strap
loops must face towards you.
Do not twist harness strap or
harness adjustment strap.
Make sure the same harness strap
loops are fitted completely on both
sides of the splitter plate.
1
2
3
sewn
end
Coutures à
l'extrémité
1
Thread Buckle and Chest
Clip
Harness strap ends go through
the
back
of buckle tongues and
through the chest clip
front to
back
as shown.
6
If you have removed the harness straps from the
splitter plate, and the buckle tongues and chest clip
have been unthreaded from the harness straps, follow
the steps below to rethread them.
5
Adjust Headrest to
Highest Position
1
2
3
sewn
end
Coutures à
l'extrémité
2
If you cannot achieve a snug har-
ness fit for your child, see pages
15-18. To learn how to check har-
ness tightness, see pages 52-54.
OR