continued on next page
Cleaning Parts of Car Seat & Installing
Seat Pad Set
66
65
Pull Pad Down and Off of
Bottom of Harness Holders
Pull up to remove completely.
From Top of Seat, Pull Pad
Off of Shell
8
9
Headrest Style 1: Place
Elastic Straps on Headrest
Pad Around Headrest/Harness
Adjustment Levers
Headrest Style 2: Locate Pad
Fabric Tab Slot in Headrest
Gently Pull Headrest Pad
onto Headrest
1
3
2
Pull Pad Off Sides and
Bottom of Shell
7
Cleaning Pad and Accessories
Machine wash separately with cold water on a gentle cycle. Make
sure the harness covers are closed so the fastening strips are not
exposed. Do not use bleach. Tumble dry separately for 10-12 minutes
on low heat. Remove immediately.
Cleaning Harness Strap
Check the harness straps often for any wear or damage.
Do not fully pull the harness strap out of the car seat. Leave
it threaded in the hip harness slots. If removed, you will not be
able to rethread it.
Spot clean using warm sudsy water and damp cloth. Spilled food and
liquids on the car seat may result in mold or bacterial growth over
time. These spills could also attract insects or rodents.
Cleaning Buckle & Car Seat Shell
Spot clean using warm sudsy water and damp cloth. Do not submerge
into water.
Do not use the child restraint without the seat pad or with
damaged harness straps.
Adjust
Headrest
to Highest
Position
There is one at the headrest/harness adjustment handle.
Slide the fabric tab into the slot in headrest as shown.
OR
OR