14
13
If you cannot achieve a snug harness fit for your child, see pages
15-18.
To learn how to check harness tightness, see pages 52-54.
Failure to place buckle’s metal retainer completely through
pad and shell can result in serious injury or death.
From Top of Seat,
Pull Buckle Out of
Shell and Pad
Insert Buckle’s Metal
Retainer into Slot
Closest to Child
Buckle
must
face out.
Rear-Facing Mode
: You
must
use the 1st or 2nd buckle
slots.
Forward-Facing Mode
:
Any slot can be used.
Reach Under the Seat
Between Base and Shell
and Through Recline
Handle
Pull buckle’s metal retainer
completely through pad and
shell.
Check Buckle
Pull up on buckle to make sure
it is secured.
The buckle
must not
pull out.
1
2
3
5
1
2
3
6
1
2
3
7
1
2
3
8
1
2
3
Unbuckle Harness
Press in towards the
top
of
the red button to release the
buckle tongues.
Fully Recline the Car
Seat
Pull out on recline handle and
push top of child restraint back.
Locate the Buckle’s
Metal Retainer
Reach under the seat between
the base and shell and through
the recline handle.
1
2
3
1
1
2
3
2
1
2
3
3
Buckle
Tongue
Rotate Metal Retainer
and Push It Up Through
Buckle Slot in Shell
1
2
3
4
1
2
3
Changing Buckle Position