47
Raise or Lower Headrest
Squeeze the headrest
adjustment lever. Raise or
lower headrest to proper
height and release headrest
adjustment lever to lock into
place. Check by pulling up
and down on the headrest.
The headrest has 12 height
positions.
NOTE:
You may need to pull
the headrest up slightly after
you squeeze the handle to
move the headrest up or down.
4.
Buckle Lap and
Shoulder Belt
Lap belt should cross the
child’s upper thighs. The
shoulder belt should lay
snugly across the center of
the child’s shoulders and
across the chest (not on the
face or neck). Both belts
should lay in the booster
belt path as shown.
5.
F. Installing Belt-Positioning Booster
Place Child Restraint
Forward-Facing in
Vehicle
Place child restraint in the
back seat,
flush
as much
as possible against the
back of the vehicle seat.
Center the child restraint in
the chosen seating position.
DO NOT use the level to
ground line in the booster
mode.
1.
F-2
Installing Using the Lap and
Shoulder Belts
Place Child in Seat
Child should sit with its back
and bottom flat against the
back of the child restraint.
2.
You
DO NOT
use a locking clip when using this seat as a belt-
positioning booster.
Position Headrest
Position the headrest so that
the midpoint of the child’s
head is in the middle of the
headrest as shown.
3.
46
continued on next page.
4358-5626A Rumi S1 Inst.indd 49-50
4358-5626A Rumi S1 Inst.indd 49-50
2/23/12 2:46 PM
2/23/12 2:46 PM
