E-3
Preparing to Install
LATCH Forward-Facing
Remove LATCH and
Tether from Storage
Open the storage drawer
and remove the tether and
LATCH belt.
1.
Thread LATCH Across
Pull the LATCH connector
across the back and out the
other side as shown. Do
not twist the LATCH belt.
3.
Adjuster
1.
34
35
continued on next page.
E-4
Install Forward-Facing
With LATCH
Note:
Review your vehicle’s owner manual for LATCH belt use.
Do not use the LATCH system along with the
vehicle belt.
Check LATCH belt before each use. Use only
if the belt can be tightened properly and
securely.
When installing without the top anchorage
strap (tether), use the level to ground line on
side of the shell.
Failure to follow these warnings can result in
serious injury or death.
E. Installing Forward-Facing
Thread LATCH Belt
Insert the connector
with
the adjuster closest to it,
through the forward-facing
belt path on left side of shell
as shown.
2.
Place Child Restraint in
the Back Seat
Forward-Facing
Place child restraint
against the vehicle seat
back
forward-facing
.
Center the child restraint
in the chosen seating
position.
When using the top
anchorage strap
(tether),
install the child
restraint flush against the
back of the vehicle seat.
When using without the
top anchorage strap
(tether),
make sure the
level to ground line is
level to the ground.
4358-5626A Rumi S1 Inst.indd 37-38
4358-5626A Rumi S1 Inst.indd 37-38
2/23/12 2:46 PM
2/23/12 2:46 PM
