Check LATCH Belt
Tightness
Grasp the child restraint
at the belt path
with one
hand. Push and pull the
child restraint from side
to side, forward and back.
The child restraint should
not move more than 1
inch.
NOTE:
If it moves more
than an 1 inch, try
reinstalling the child restraint or try another seating location.
Secure your child in the child restraint.
If installing
without the tether,
recheck the recline angle. Repeat
steps if not reclined correctly.
Tighten Top
Anchorage Strap
(Tether)
Push firmly on the back
of the child restraint and
tighten top anchorage
strap (tether).
4.
Tighten LATCH Belt
Place knee in the child
restraint. Push down firmly
while pulling up on the
loose end to tighten LATCH
belt.
3.
5.
36
37
2.
Connect LATCH to
Vehicle LATCH Anchor
Fasten one LATCH belt hook
to the anchor in the vehicle
seat bight. Repeat for other
side of child restraint.
Installation Tip:
It maybe easier to
tighten the LATCH belt
by reaching between
backrest pad and
headrest pad and pull
the free end of the
LATCH belt as shown.
E. Installing Forward-Facing
Installation Tip:
Loosely attach
the tether hook
before attaching
the LATCH belt.
Consult vehicle’s
owner manual for
specific location.
1
2
To Remove LATCH Belt
From Vehicle Anchor
Remove child from child
restraint. Press down firmly
on adjuster side of child
restraint and press release
button to release tension.
Unhook LATCH from bar by
squeezing spring lever and
twist hook
(1)
. Pull LATCH
hook away
(2)
.
6.
4358-5626A Rumi S1 Inst.indd 39-40
4358-5626A Rumi S1 Inst.indd 39-40
2/23/12 2:46 PM
2/23/12 2:46 PM
