46
XXXXX
9.
Check Belt Tightness
Hold child restraint at the belt
path with your weakest hand.
Push and pull from side to side.
It should not move more than
1 in. (2.5 cm).
To Release Lower Anchor
Belt
Remove child from child restraint.
Remove tension from the lower an-
chor belt by pushing down on side of
child restraint with the lower anchor
belt adjuster. Then press the adjuster
button to loosen belt.
Unhook from anchor by squeezing
spring lever on hook, pushing hook
back into the seat bight, and twisting.
Then pull it out of the vehicle seat.
Store lower anchor belt when not
in use. See page 25.
45
Vehicle Belt Installation
WARNINGS:
Do not use the lower anchor belt along
with the vehicle lap or lap/shoulder belt.
Secure lower anchor hooks to storage
attachments as shown when installing
with vehicle belts.
Check vehicle belt before each use.
Use only if the belt can be tightened
properly and locked securely in place.
Failure to follow these warnings can result in serious injury
or death.
1.
Place Child Restraint
Forward Facing Flush
Against Vehicle Seat Back
Put the child restraint into position
1
.
NOTE:
Do not use any recline
positions except to make the child
restraint flush against the vehicle
seat back. Vehicle seat back must
be upright.
If it moves more than 1 in. (2.5 cm),
you can try:
A.
Putting your knee in the seat and pulling the belt tighter.
B.
Reinstalling the child restraint.
C.
Changing to
a different seating location.
D.
Switching to vehicle belt installation.
continued on next page
2.
Loosely Attach Tether
Hook
Check vehicle owner’s manual for
specific location.