44
continued on next page
2.
Route Lower Anchor Belt Through
Forward-Facing Belt Path
You may need to raise the headrest up to thread the
lower anchor belt.
The lower anchor belt adjuster can be
on either side.
Do not twist belt.
4.
Place Child Restraint
Forward Facing Flush
Against Vehicle Seat
Back
Put the child restraint into
position
1
.
3.
Finished Lower Anchor Belt Routing
Adjust headrest to the correct position for your child.
See page 6 for fi t guidelines.
5.
Loosely Attach Tether
Hook to Vehicle’s
Tether Anchor
Check vehicle owner’s manual
for specifi c location.
43
6.
Attach Lower Anchor
Hooks to Vehicle’s
Lower Anchors
Review your vehicle owner’s
manual for lower anchor loca-
tions and lower anchor belt use.
7.
Tighten Belt
Place hand in child restraint. Firmly push down while pulling
free end of belt to tighten.
It may be easier to pull the back panel of the pad away from
shell and pull the free end of the belt parallel with the belt
path opening as shown.
NOTE:
Do not use any recline positions except to make the
child restraint flush against the vehicle seat back. Vehicle
seat back must be upright.
8.
Tighten Tether
Push fi rmly on the back of the
seat and pull the tether strap
to remove all slack and create
tension on the strap.