13
Reclining Child Restraint
How to Change Positions
To recline,
squeeze up and then
pull
out on recline handle and push top of
child restraint back.
For upright,
squeeze up and then
pull out on recline handle and pull top
of child restraint forward.
This child restraint has 4 positions:
Rear Facing
For children between 5-22 lb (2.3-
10 kg)
, the bottom level line on shell
MUST
be parallel with the ground.
For children 22-50 lb (10.1-
22.6 kg) who can sit up
unassisted
, rotate the child restraint
between the 2 level lines.
Forward Facing
-
1
Upright
Booster Seat
-
1
Upright
1
2
3
4
NOTE:
When forward facing, the reclined positions are to be
used only to install the child restraint and booster seat flush
against the vehicle seat back. Vehicle seat back must be
upright.
14
Removing Seat Pad for Cleaning
To remove accessories, see page 22.
1.
Fully Loosen Harness
Straps
Push down on harness release lever
(under fl ap on front of seat pad)
while pulling out on harness straps
as shown.
2.
Unbuckle Harness
Press in towards the
top
of the red
button.
Pull buckle tongues out.
3.
Fully Recline the Child
Restraint
Squeeze up and then pull out on
the recline handle and push top of
child restraint back.
continued on next page
4.
Locate Buckle’s Metal
Retainer
Fully recline the child restraint and
reach under the seat between the
base and shell.
Rotate metal retainer and push it
up through shell and pad.