Safety 1st advance EX 65 air+, Instructions Manual, Page: 22 / 32

38 37
2. Place Child Restraint
Rear Facing in Back Seat
For children between 5-22 lb (2.3-
10 kg)
, the bottom level line on shell
MUST be parallel with the ground.
For children 22-50 lb (10.1-22.6 kg)
who can sit up unassisted
, rotate the
child restraint between the 2 level lines.
Start by making the bottom level line
parallel with the ground, then rotate seat
up. Do not rotate past the top level line.
4. Route Vehicle Lap or
Lap/Shoulder Belt
Through Rear-Facing
Belt Path
5. Reach Under Pad and
Pull Vehicle Belt Across
to Opposite Side
Belt MUST be in front of buckle strap
and under pad. Do not twist belt.
You MUST use the 1st or 2nd buckle
slot.
1
2
continued on next page
6. Buckle Vehicle Belt
3. Check if Your Vehicle
Belts Will Work With This
Child Restraint
This is very important because
not all vehicle belts will work with
child restraints.
Review pages 27-29 and your
vehicle owner’s manual to
determine what kind of vehicle belt
you have and how to lock a child
restraint in place.
1. Fully Recline Child
Restraint
Squeeze up and then pull out on recline
handle and push top of child restraint
back.
WARNINGS: Do not use the lower anchor belt along with the
vehicle lap or lap/shoulder belt. Secure
lower anchor hooks to storage attach-
ments as shown when installing with
vehicle belts.
Store the tether hook when used rear
facing. Attach the tether hook to storage
attachment as shown and gently tighten
to remove slack.
Check vehicle belt before each use.
Use only if the belt can be tightened
properly and locked securely in place.
Failure to follow these warnings can
result in serious injury or death.
Vehicle Belt Installation