7. Hold the gun firmly with both hands as shown and pull the
trigger just once. The electronic will by itself finish the brazing
process.
8. Hold the gun in place for 3-4 sec after the brazing while the
brazing cools down.
9. Remove the gun
straight
backwards without pulling the trig-
ger!
10. After the braze has cooled, knock the shank off the brazing
pin using a hammer.
11. Use a new ceramic ring for each new pin braze.
The brazing is completed.
PINBRAZING (Continued)
OPERATION
10
A red light indicates low batteries on the unit.
Charge as soon as possible.
IMPORTANT
