SafeNet Luna SA Page 80 Configuration Manual Download

Page: 80 / 109

CHAPTER 5 Creating a Partition on the HSM

Decide whether this should be a group PED Key (see

"What is a Shared or Group PED Key?"

), enter [YES] or

[NO] on the PED touchpad, and press [Enter].

Next, you are asked to provide a PED PIN (optional, see

"What is a PED PIN?"

— can be 4-to-48 digits, or can be

digits if a PED PIN is not desired).

You must press [Enter] to inform the PED that you are finished entering PED PIN digits,

that you have decided

not to use a PED PIN (no digits entered).
When you provide a PED PIN – even if it is the null PIN (by just pressing [Enter] with no digits) – the PED requests
it a second time, to ensure that you entered it correctly.

Press [ENTER] again.

You are then prompted

Luna SA Configuration Guide

Summary of Contents for Luna SA













































































































Search results

Summary of Contents for Luna SA

Reviews:

Related manuals for Luna SA

Brands by name

Popular brands

SafeNet Luna SA, Configuration Manual

Search results

Summary of Contents for Luna SA

Reviews:

Related manuals for Luna SA

Brands by name

Popular brands