15
© 2011 SafeLine and all the SafeLine products and accessories are copyrighted by law.
Installation
ENGLISH V. 4.04
ACTIVATING THE SIM CARD
Before you can start using a new SIM card, the card has to be prepared.
The SafeLine 3000 can only recognize the PIN code if the code is set to “0000”, “1234”, “1111”. In some
cases the code can also be deactivated. If the PIN code is set to “0000” or if it is deactivated the SIM card
can be moved from the SafeLine 3000 to any of SafeLine GSM products. If the code is set to “1234” the
SIM card can be moved to another SafeLine 3000 unit if the software version is 2.00 or higher.
If the PIN code is set to “1111” the SIM card cannot be moved to any other telephone (SafeLine or
otherwise) without having the PUK code.
PIN code (set to “0000”, “1234” or deactivate).
1.
Insert the SIM card in an ordinary cellular phone. In the “Security settings” menu, change the PIN
code to “0000”. If this is not possible , set the PIN code to “1234” or set the ”PIN code request”
option to “OFF”. (Might not always function)
2.
Verify the PIN code by switching your phone off and on again.
3.
Make a call from your phone to verify that the SIM card is active, before you move it to the
SafeLine 3000.
4.
Also make a call to SafeLine 3000 after insertion to check that it is possible to get a proper
connection.
You can protect the SIM card against unauthorized use.
1.
Insert the SIM card in a cellular phone.
2.
In the “Security settings” menu, change the PIN code to “1111”. When the SIM card is inserted in
the SafeLine 3000, the code will be changed to a random number, thus making it impossible to
use the card in another cellular phone unless it is unblocked by means of the PUK code.
NOTE!
If you enter the wrong PIN code 3 times, the SIM card will be
blocked (requires PUK code to unblock). The SafeLine 3000 can
not be started and the LED (4) will turn red.
If PIN code “1234” is used make sure the SafeLine 3000
software is 2.00 or higher.