SafeHome WS200X, User Manual, Page: 30 / 106

www.safehome.dk www.safehome.dk 14
15
C. Zone Settings
Programming each zone in ALERT Mode:
Step Keys Description Note
1
PIN +
You must be in
READY mode
before
programming To make sure you are in READY
mode:
Enter your PIN
Press
, the symbol disap-
pears from the screen.
2
+
From READY mode
press the two but-
tons in succession
to select the zones
to be activated dur-
ing ALERT
Toggle 1, 2, 3, 4, 5, 6, 7, 8 to turn
each zone ON or OFF
If no number appears, the zone is
turned OFF
The Smart Panel will display the
below image:
3 Complete the set-
ting After the setting is completed, return
the Smart Panel to STANDBY mode.
3.3.4 HOME Mode
The system is pre-programmed to work with the default settings already when the pack-
age is opened. These settings can be adjusted to your own needs and desires. The
HOME setting allows you to set the Smart Panel to have some zones connected in ARM
mode, some zones connected ALERT mode and some zones completely disconnected.
HOME Mode factory settings for devices in the package:
Zone Status (MODE)
Door/Window Sensor 1 ALERT
Motion Sensor (PIR) 8 ARM
Camera 6 NOT ACTIVE
A. Entering the HOME mode
On the Remote Control: Press to activate.
On the Smart Panel: First make sure the Smart Panel is in READY mode by following
steps below for entering into HOME mode:
Step Keys Description Note
1
PIN +
You must be in
READY mode
before
programming To make sure you are in READY
mode:
Enter your PIN
Press
, the symbol disap-
pears from the screen.
2 From READY mode
to HOME mode Then System will enter HOME mode
If the Zone is enabled, a number will
appear as displayed in the image
below
Black number indicates ALERT
mode for a zone
White number Indicates ARM
mode for a zone
Blank indicates the zone is turned
OFF, number will not appear
B. Exiting the HOME mode
On the Smart Panel: Enter your 4-Digit PIN followed by to exit HOME mode.
On the Key Fob Remote: Press to exit HOME mode.