SafeHome WS200X, User Manual, Page: 28 / 106

www.safehome.dk www.safehome.dk 10
11
C. Adjusting Exit Delay
The default setting of the Smart Panel allows the user 20 seconds to exit the property
before the alarm is ARMED. However, this Exit Delay can be adjusted to between 10 and
60 seconds as follows:
Step Keys Description Note
1
PIN +
You must be in
READY mode
before
programming To make sure you are in READY
mode:
Enter your PIN
Press
, the symbol disap-
pears from the screen.
2
+
Set the new Exit
Delay
Press to select between the exit
times.
Each time
is pressed the Exit
Delay is increased by a further 10
seconds between the adjustable
range of 10 to 60 seconds. (Factory
set is 20 seconds.)
The exit time will flash on the display
until the adjustment is saved.
3 Complete the
setting After the setting is completed, return
the Smart Panel to STANDBY mode.
D. Adjusting Entry Delays
Factory set for entry delay is 30 seconds. Adjustable between the range of 10 to 60
seconds.
Step Keys Description Note
1
PIN +
You must be in
READY mode
before
programming To make sure you are in READY
mode:
Enter your PIN
Press
, the symbol disap-
pears from the screen.
2
+
Adjusting Entry
Delays
Press to select between the
Entry Delay.
Each time
is pressed the Entry
Delay is increased by a further 10
seconds between the adjustable
range of 10 to 60 seconds. (Factory
set is 30 seconds.)
The exit time will flash on the display
until the adjustment is saved.
3 Complete the
setting After the setting is completed, return
the Smart Panel to STANDBY mode.
E. Adjusting the Alarm Duration
The default setting of the Smart Panel gives an alarm duration of 1 minute after being trig-
gered. However, this alarm duration can be increased up to 6 minutes:
Step Keys Description Note
1
PIN +
You must be in
READY mode
before
programming To make sure you are in READY
mode:
Enter your PIN
Press
, the symbol disap-
pears from the screen.
2
+
Adjusting the Alarm
Duration
Press to select between the
Alarm Duration times.
Each time is pressed the Alarm
Duration is increased by a further
minute up to a maximum of 6 min-
utes. (The factory default setting is
1 minute)
The exit time will flash on the dis -
play until the adjustment is saved.
3 Complete the set-
ting After the setting is completed, return
the Smart Panel to STANDBY mode.
F. Muting the Audible Countdown
When the Smart Panel is ARMED the audible countdown (beeper) can be silenced by
pressing the
MUTE button (bottom right), during the countdown. To reactivate the
audible countdown (beeper) simply press the button again.