26
Instructions for Installation & Use
HOW T
O INS
TALL
D. Lengthen the top tether strap and connect
the attachment clip to the car's upper
anchorage point making sure to remove
as many twists as possible.
Lengthen the top tether strap by fully
pressing the adjuster button (A) while pulling
top tether strap (B) to slacken as shown left.
Refer to your vehicle owner’s manual for the
location of the upper anchorage point in the
car. If the vehicle is not fitted with a child
restraint upper anchorage point then refer
to page 37 to 40 for the installation of the
upper anchorage point provided with this
child restraint.
E. Push down on the restraint to compress it
into the vehicle seat. Whilst compressed in
the seat, pull on the lap portion to remove
all slack from the belt. Pull the sash belt
and allow excess belt to feed back into the
retractor. Ensure all slack is removed from
the lap and sash belt.
F. The restraint should now be held firmly
against the vehicle seatback.
The top tether should be left slack until
the sash belt is fitted and all slack removed.
Attachment Clip
Car's Upper Anchorage Point
Fully press Adjuster Button
(A) while pulling top tether
strap (B) to lengthen.
Pull
PUSH
CHILDREN CAN BE INJURED OR RESTRAINTS AND TOP TETHER STRAP DAMAGED
BY UNSECURED CARGO IN A COLLISION. SECURE OR REMOVE HAZARDOUS
CARGO BEFORE USING THIS CHILD RESTRAINT.
B
A
CAUTION:
