40
Instructions for Installation & Use
INS
TALLA
TION OF C
AR'S UPPER ANCHOR FITTING
IF THE CAR IS NOT FITTED
WITH CHILD RESTRAINT UPPER
ANCHORAGE POINTS
FOR SEDANS ONLY
- Drill 9mm diameter
hole in the parcel shelf on the centre line
of the seating position as shown in Fig 3.
Before drilling the hole, check the underside
for accessibility. Install the attachment bolt
as shown in Fig 2. It is recommended that
this installation be carried out by a child
restraint fitting station or licenced
motor mechanic.
FOR VEHICLES OTHER THAN SEDANS
- In Australia, consult your nearest child
restraint fitting station or traffic authority
for vehicle inspection to find the best,
correct position for the placement of the
upper anchorage point, and for the correct
attachment bolt length and use of spacers.
In New Zealand, consult the agent for the
vehicle. Note to Queensland purchasers:
The installation of anchorage points
must be approved by authorised
officers appointed by Queensland
Transport. Authorised officers can be
sourced from all Queensland Transport
Customer Service and Queensland
Ambulance Service Centres.
Attachment Bolt
Anchor fitting
Spacer(s) if
required
Vehicle metal
structure
Reinforcing
washer (cone
downwards)
Lock washer
Secure nut
UPPER ANCHORAGE
FITTINGS FOR SEDANS ONLY
Vehicle trim
Front of Vehicle
Fig.2.
