Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2021 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608, 10501022 AND OTHER PATENTS PENDING
23
Crossbar Rear
Crossbar Front
56.30”
0.50”
55.67”
28.11”
Rear
Front
1.5
1.4
Torque to
80 in-lbs
1.6
Slide Channels onto
Mounting Brackets
1.7
Slide the upper and lower
Channel Connectors into
Channels and align holes
1.9
Torque screws to 90 in-lbs
1.10
Set to distances shown below, then torque Mounting
Bracket nuts loosened at Step 1.5 to 80 in-lbs
1.8
Screw the M8 x 40MM Allen Head bolts into the Upper
and Lower Channel Splices. Due to tight manufacturing
tolerances, both bolts must remain loose until Step 1.9
1.3
Do not tighten
Slide and position the Channel Connector into the
Mounting Body as shown, then screw the 30MM Flat
Head bolt into the Base Puller.
FBM-1007
ASSEMBL
Y INSTR
UCTIONS–L5H2 UNIVERSAL FBM
Summary of Contents for Prime Design FBM-1007
Page 28: ...USAM FBM1007 US01 Rev A 0720 ...
