Prime Design Limited Warranty. Seller’s sole and exclusive warranty (and Buyer’s sole and exclusive remedy and Seller’s entire liability for any breach thereof) with respect to the Goods is set forth in the Limited Warranty document available at primedesign.net/warranty-liability
(the “Prime Design Limited Warranty”).
▪
TM & © 2021 PRIME DESIGN. PROTECTED BY ONE OR MORE OF THE FOLLOWING PATENT NO.’s 6427889, 6764268, 6971563, 8991889, 9415726, 9506292, 9481313, 9776476, 9796340, 10470565, 10486608, 10501022 AND OTHER PATENTS PENDING
19
Crossbar Rear
Crossbar Front
41.93”
28.11”
Flush to rear
55.67”
Rear
Front
M8 X 20MM
Lock Washer
Flat Washer
8.625”
Crossbar Rear
Crossbar Front
(B) 48.00” ErgoRack
40.00” AluRack
(A) 96.00” ErgoRack
100.00” AluRack
(B) 48.00” ErgoRack
60.00” AluRack
1.11
FBM-1007
ASSEMBL
Y INSTR
UCTIONS–L4H2 UNIVERSAL FBM
2.4
2.2
Set to distances shown below, then torque Mounting
Bracket nuts loosened at Step 1.5 to 80 in-lbs
MOUNTING BRACKETS
2.1
Slide the remaining Aluminum Strip Nuts into each
end of the Channels, and attach the Channel Caps
2.3
Loosen nuts
3 Crossbar models:
Position the center
Mounting Brackets
as shown.
*2 & 3 Crossbar models:
Position the front Mounting
Brackets as shown.
Set to distances shown below:
Use Dimensions A for 2 Crossbar models.
Use Dimensions B for 3 Crossbar models.
Do not torque the Crossbar Mounting Brackets until Step 3.4.
Finger-tighten them into designated dimension to hold them in
place, then proceed to your Feature (FEA) Assembly Manual.
Using the supplied fastening hardware, attach the Crossbar
Mounting Brackets into the Aluminum Strip Nuts placed into
the Channels at Step 2.1
*2 Crossbar ErgoRack models:
See Page 24 regarding center
Crossbar Mounts.
Summary of Contents for Prime Design FBM-1007
Page 28: ...USAM FBM1007 US01 Rev A 0720 ...
