To record broadcasting
1. Press the SCAN switch of the FM receiver to listen the received broadcasting.
2. Adjust recording sensitivity (HQ, SP, and LP).
3. Press REC button to record the received broadcasting.
4. Follow the same procedure as with the built-in microphone.
3
28
To use FM radio receiver
(Model SR-320SR/160SR)
To connect
1. Connect FM radio reception to the hole between LINE/FM connector and the earphone
jack.
2. If it is connected properly, 'FM' appears on the LCD.
1
To receive broadcasting
1. Insert the earphone into earphone jack of FM receiver and listen.
2. Adjust volume of FM receiver properly.
3. Press the SCAN switch of the FM receiver to listen the received broadcasting.
4. When the limit reaches the maximum of FM reception extent, it will not receive
further broadcasting.
5. Press RESET button to return to the first section.
6. Try it again.
7. The received broadcasting does not be saved in the memory after you disconnect the FM
receiver. When you connect the receiver again, you should try to receive FM again.
2
When you don't receive or record FM radio, disconnect the FM radio receiver from the
main unit. If not, the battery will be exhausted quickly and cause a leakage.
Tip
Please note that FM reception can be weak when you drive a car or are
in the places where the radio field intensity is weak.
Tip
The main unit connected to FM radio receiver does not turn off automatically.
27
Recording telephone conversation.
1. Recording input select switch should be in TEL position.
2. Connect the TEL connector of an external speaker with the telephone connector on the wall.
3. Connect the LINE connector of an external speaker with a telephone.
4. Follow the same procedure as with the built-in microphone.
Playback
1. Make sure the main unit is in stop state. If not, press PLAY button to stop.
2. Select the FOLD and index you want and press PLAY button to start playback via the external
speaker.
3. Follow the same procedure as with the playback of the main unit.
4. The external speaker produces sound instead of built-in speaker.
