M A N A G E M E N T S Y S T E M
44
Several management methods are supported for easy and convenient managing of the equipment:
•
Local management using LCD display and keypad;
•
Local management using ASCII terminal attached to RS-232 management port of the IDU;
•
Remote management using terminal connected through analog line and modem to the RS-232
serial management port of the IDU;
•
Local or remote management over Ethernet management port of the IDU.
Consequently, the equipment can be managed:
-
using LCD display and keypad,
-
using Command Line Interface on Terminal and/or Telnet session (via RS232 and Ethernet
console ports respectively),
-
using IDU Web page.
Current implementation of SNMP service is intended for data acquisition (collecting statistics) and
management of the alarms.
SAF Tehnika provides private MIB and supports MIB-II RFC1213 standard MIB, this way
enabling easy integration of the CFM equipment into any SNMP managed network (under any
standards based SNMP management application or MIB browser), for example, HP Open View.
The CFM-LM offered management platform does not highlight special PC requirements. The
customer should choose the appropriate software depending on the management method(s) he
prefers. The following software categories could be used:
•
Terminals (e.g., Hyper Terminal);
•
Telnet browsers or SNMP management applications (e.g., HP Open View);
•
Web browsers (MS Internet Explorer, Netscape Navigator or other).
Physical and Logical Management Interfaces
LCD
Keypad
Ethernet
RS-232
Serial
Port
MUX
IF
ODU MM
Controller
Workstation
Physical
management
interfaces
Software components in management
controller board
Radio terminal (ODU + IDU) hardware
components accessible from
management system
MM
C
ontroller Boar
d
UDP
TCP
SNMP
HTTP
Telnet
C
omm
an
d
Lin
e I
nterp
reter E
n
gi
ne
Management
system users
IP / I
CMP
IF
Traf
fic
In
terf
ac
e(s)
or
Ethernet
board
Summary of Contents for CFM-13-LM
Page 63: ...60 W Web interface 45 ...
Page 64: ...61 ...
