SAF CFM-13-LM, Technical Description

Page: 37 / 64

I N D O O R U N I T
34
A maximum of 350 mm deep rack is required for the IDU to be mounted, from mounting points
of front panel including space behind the unit for cables to RF, Grounding point, Ethernet and
Serial management interfaces.
Some space is required in front of the IDU for traffic interface cables, - as a minimum 5 cm from
the front panel are needed for Ethernet patch-cable and E1 interface cable.
As a minimum of 10 cm to 12 cm of supplementary space is required (mainly depending on the RF
cable type) behind the IDU for management interface cables and RF cable.
CFM-8-REB IDU
The Remote Ethernet Bridge IDU is fixed configuration Ethernet bridge, provides full radio capacity of 8
Mbps to 10Base–T UTP Ethernet interface on the LAN side.
CFM-8-REB
S L
R A
CLEAR
ENTER
- +
48V
WTX WRX LINK LTX LRX COL ERR R
LAN
Figure 6. The CFM-8-REB IDU front panel
Figure 7. The rear panel of the CFM-8-REB IDU
4 cm
23 cm
(9.10 ")
(1.57 ")
(16.93 ") 42.6 cm
(19.29 ") 48.6 cm
12 cm
(4.72 ")