O U T D O O R U N I T A N D A N T E N N A
11
The ODU contains
temperature sensor
and condensing
moisture sensor
. These indications are
accessible through all available management methods. The temperature sensor indicates the
temperature within the ODU, - it is normally about 6°C higher than the outer temperature. As for
the triggered moisture sensor, it is most likely that the ODU cover is opened. This is abnormal
operational condition and should be averted as soon as possible.
Labelling
Each Outdoor Unit is labelled.
The ODU is uniquely identified by the combination of product number (“P/N”) and serial
number.
The label contains five squares (see figures below). One of the first two squares will have a letter L
or H (other is blank) which denotes what band side the specific radio operates (Low or High).
Either the third square or the fourth square will have letter A or B (the fourth square – letter A or
the fifth square – letter B), which denotes the subband. The fifth square is blank.
Figure 3. Label of the CFM-22-LM Radio
Summary of Contents for CFM-13-LM
Page 63: ...60 W Web interface 45 ...
Page 64: ...61 ...
