INTEGRA-W/INTEGRA-WS User Manual INSTALLATION
SAF Tehnika JSC
10
Assembly procedure
Tools required
: 13mm (0.512”) wrench (comes in package)
1
Remove Integra-W FODU with antenna
from mounting bracket.
Default polarization is vertical.
2
Using 13mm wrench remove indicated nuts
and fixation plate [10, 11, 12, 13, 14].
3
Removed parts must be attached back
with 90 degree offset (see above). Gap
between side screw flange nuts [13] and
fastening angles should be 5mm.
4
View of Integra-W FODU with swapped
polarization.
5
When polarization is changed, make sure
that drain hole cap located at grounding
flange nut should be removed and
inserted in previous drain hole.
