SK RB/RLB 9022WI with WABCO PAN 22-1
11.427GB Edition 11/09
-
34
-
Push
new
pad retainer bracket 63.1 into the openings (arrows) of the
brake calliper and press down so that the bracket engages between
the radial shoulders of the spring clips.
Note:
The pad retainer bracket must be installed above the cables of the wear
indicator.
Tighten
new
bracket screw 63.2 to the brake calliper with the
prescribed torque (Table 1, position II).
Attach the connector of the wear indicator.
Fasten the cable outlet to the
new
cable clip 64.4.
Check that the cables are laid correctly!
Press
new
plug 65 into the opening of the brake calliper!
Ensure that it seals tightly!
Check that the wheel hub can turn without binding!
Caution: After completion of the installation work, check the brakes on a
roller dynamometer.
Fig. 29
Fig. 30
Fig. 31
63.1
65
Installation instructions – PAN 22-1
Fig. 28
63.2
64.4
