SK RB/RLB 9022WI with WABCO PAN 22-1
11.427GB Edition 11/09
-
38
-
Installation sequence:
Press in two
new
bushes 70.3 for the long guide pin 70.1.
First (A) press in the inner bush with a drifter (L
1
= 52.2
±
0.2 mm) and
then (B) the outer bush with a drifter (L
2
= 13.2
±
0.2 mm) until the
drifter bottoms in each bore.
Grease the sliding surfaces of the bushes and the gap between the
bushes.
Press in one
new
bush 80.3 for the short guide pin 80.2.
Press in bush (C) with a drifter (L
3
= 25.7
±
0.2 mm) until the drifter
bottoms in the bore.
Grease the sliding surface of the bush.
Press
new green
protective caps 80 into the seal seat (ring groove /
arrow) of the brake calliper 59, 60.
Note:
Clean the seal seats before pressing in the caps.
The
seal seats
must be
grease-free
.
The protective caps 80 can be pressed into the seal seat by hand.
Ensure that the protective cap fits uniformly in the seal seat of the brake
calliper!
Installation instructions – PAN 22-1
Fig. 42
F
C
L
3
Fig. 43
Fig. 44
59, 60
80
L
1
