B) Maintenance instructions
Brake pad check
Caution!
Observe the wear limits of the brake pads.
Check the thickness of the brake pads for compliance with the legal
requirements at regular intervals, but at least every three months,
depending on the operation of the vehicle.
A = Minimum residual lining thickness 2 mm
B = Total lining thickness of new pads 21 mm
When the residual lining thickness is A
≤
2 mm, replace the brake
pads.
Wear indicator
The amount of life left in the linings can be determined at the point
of the inner brake calliper guide when the wheels are still fitted.
When new, the rubber sealing element can be seen with both lips
(position C).
When worn, the brake calliper is in position D. In this case a check is
necessary on the brake linings and brake discs with the wheels
removed.
A
B
10
C
D
Summary of Contents for SK RB 9022 H
Page 4: ...NOTIZEN NOTES NOTE 4...
Page 33: ...NOTIZEN NOTES NOTE 33...
