English 10 English
User Interface PRESTOJET 30K
9
10
11
12
14
15
16
17
13
Figure 4
9. LED Indicator Power Switch: Lights up when
the equipment is ON and connect to the
power supply.
10. Thermal LED: Lights up when the equipment
is overheat.
11. Connecting the torch: LED Indicator. Lights
up when the torch is wrong connected to the
connector [5] or the shield cup body is not
tighten to the holder.
12. Equipment is working LED Indicator: Lights
up when the equipment is working.
13. Manometer: Allows to read the air pressure.
14. Purge Pressure Regulator Control: Allows to
regulate the air pressure.
15. Internal / External Air Switch:
Symbol
Description
IN COMPR
Internal compressor
External air network
16. RUN/SET Switch: In the “SET” you cannot cut.
Symbol
Description
SET
Purge test
RUN
Ready to cut
17. Output Current Control: Use to set the output current
used during cutting.
User Interface PRESTOJET 45
21
14
18
19
20
Figure 5
18. Home Button: Allows the user to return to
the main view.
19. Active Button Control: Used to select the
available processes and their parameters,
and to set the value current.
20.
Purge Test Button: Enables gas flow
without turning on output voltage.
21.
LCD Display: Display shows processes and
parameters.
A
230V
6.9 BAR
23
24
25
26
22
Figure 6
22. Supply Voltage: 120Vac or 230Vac
. T
he equipment
has a built-in detection of the supply voltage.
WARNING
Gouging is only possible with a 230Vac supply voltage!
Output current range 30-45A.
23. Current Process: See „Table 1. User Setup Menu”.
24. Air Pressure. To set the air pressure, use the control
[14].
25. Set Value Current: To set the value current, use the
Active Button Control [19].
