Saf-Fro DIGISTEEL III 320C, Operation And Maintenance Instructions, Page: 4 / 28

4 / 28
1 - GENERAL INFORMATION
1.1. PRESENTATION OF INSTALLATION
DIGISTEEL III 320C / DIGIPULS III 320C is a manual welding set that enables the following:
☞
MIG-MAG welding with short arc, speed short arc, spray
to 320A.
☞
Feeding different types of wire
Steel, stainless steel, aluminum and special wires
solid and cored wires
diameters from 0.6-0.8-1.0-1.2 mm
☞
Coated electrode welding
1.2. WELDING SET COMPONENTS
The welding set consists of 4 main components :
1 - Power source including its primary cable (5m) and its ground strip (5m)
2 - Workshop trolley (optional),
3 - Universal trolley (optional),
4 - Cooler unit (optional)
Each item is ordered and supplied separately.
Options ordered with the welding set are delivered separately. To install these options, refer to the instructions supplied with the
option.
WARNING :
The plastic handles are not intended for slinging the set. Stability of the equipment is
1
2
DIGISTEEL III 320C
ALLATION
is a manual welding set that enables the following:
MAG welding with short arc, speed short arc, spray-arc, normal pulsed mode (only on DIGIPULS), using currents
Steel, stainless steel, aluminum and special wires
1.2 mm
PONENTS
main components :
Power source including its primary cable (5m) and its ground strip (5m)
set are delivered separately. To install these options, refer to the instructions supplied with the
The plastic handles are not intended for slinging the set. Stability of the equipment is guaranteed only for an incline of maximum 10°.
3
4
1
EN
320C / DIGIPULS III 320C
), using currents from 15A
set are delivered separately. To install these options, refer to the instructions supplied with the
guaranteed only for an incline of maximum 10°.