2
USER GUIDELINES
CAUTION
· Please pay attention when using to consider the patient’s safety most importantly.
· Check the condition of the product before use.
· Stop using and inspect the product when an abnormal sign occurs such as calescence, vibration
or noise before or during operation.
· Please contact manufacturer if problem cannot be solved.
·
Prepare extra consumables before use for safety.
· Change or insert bur after the motor is completely stopped. Otherwise, inside of the angle
could be damaged by bur, and it could cause an accident.
· Please sterilize and lubricate the angle handpiece right after use. Otherwise, it could be damaged
due to coagulation of blood inside the product.
·
The control box and foot controller are a not steam sterilization objects.
·
The input power is available at AC 100-120V / 220-240V.
(Check input voltage before connecting the AC power.)
· Dispose the irrigation tube as a medical waste after use.
· Contact manufacturer if an incorrect display appears on the screen.
· Do not drop or bang the product.
· Do not damage the irrigation tube, as it will not work properly due when the tube is broke
or dislodges.
· Do not insert oil into the motor. It will damage bearing or cause calescence.
· The product is designed to be used indoors; do not use outdoors.
· Do not use the product in a humid or dusty environment.
· Use only regulated products and consumables by the manufacturer. Otherwise,there could
be a risk of an accident or failure.
·
Replace the cords immediately when it is worn-out or damaged to prevent electric shock to the user
or patient.
·
Manufacturer may change specification and design of this product in order to improve the quality.
· User has responsibility to operate and maintain this product.
· The company did not sterilize the product. Please make sure to sterilize before operation.
(User sterilization)
· US Federal law restricts this device to sales by or on the order of a dentist.
· Do not sterilize with different methods other than moist heat sterilization. It may cause damage
to the product
