15
Number of icon bar indicates loudness level of sound.
4 stages, set the sound volume by pressing or button.
Press the OK Button ( ) to complete the setting after setting the level of volume.
By using , button, determine the initialization.
Choose “NO” with button, the initialization will cancel.
Choose “YES” with button, the initialization will start.
Screen will off for 5-10 sec. And show reset screen with beep sound and message “RESET Completed”.
Then save and return to main.
1. AUTO CALIBRATION
Other Function (SETUP)
Press the Menu Button ( ) to go to SETUP Menu and press the OK Button. ( )
Press the Control Button ( , ) to the desired item.
Press the OK Button ( ) in SETUP to save and return to main.
After connecting the angle to the motor, hold the motor by hand tightly. Step the foot controller fully in order
to start the calibration.
Calibration will be completed with beep sound and display “Calibration Completed”.
- The calibration function sets up for all products from the first delivery or purchasing
by the manufacturer. It is recommended to calibrate the motor before using when the motor is
replaced or repaired.
- Beep sound shuts off in mute mode.
2. Sound Volume Control
3. Program Reset
