SAESHIN Implant XCUBE, Instruction Manual

Page: 11 / 48

* RPM
* Torque
**N·cm **N·cm 5~50N ·cm 5~55N ·cm 5~60N ·cm 5~65N ·cm 5~65N ·cm
1:5
**N·cm
1:4 1:1 16:1 20:1 27:1 32:1 64:1
1:4
200,000rpm
1:5
250,000rpm
1:1
50,000rpm
16:1
3,100rpm
20:1
2,500rpm
27:1
1,850rpm
32:1
1,560rpm
64:1
780rpm
* The free-running speed of the handpieces shall be in accordance with the manufacturer’s instructions
at a tolerance of ±10 % as specified. (Refer to ISO 14457)
<Motor Auto-calibration function>
- Provide the optimized performance by BLDC motor (0~50,000rpm) and Angle handpiece of several kinds.
* Gear Ratio: 1:4, 1:5, 1:1, 16:1, 20:1, 27:1, 32:1, 64:1
- 9 programmable memories for setting speed, gear ratio, torque, rotating direction, irrigation pump.
- If the load on the bur is higher than set torque, the motor is stopped automatically.
- For releasing the overload function, Release the foot controller.
- Actual RPM and Torque value are displayed on the screen. It makes user can do more delicate operation.
- Foot controller is designed ergonomically to control all the functions. And it provides high convenience.
PRODUCT FEATURES & ACVANTAGES
* The function is set up when the product is released by manufacturer and Use the function when
user repair or change the product.
* Program 0 is the only for auto-calibration function, so the memory function or other setting
value does not work.
<BLDC motor designed by SAESHIN’s own technology and know-how>
<Program memory function>
<Automatic overload protection function>
<Realtime RPM, TORQUE view system>
<Ergonomic foot controller>
8
- Motor auto-calibration function is that control box check the angle handpiece status to reconcile speed
and torque that user wants with angle handpiece for accurate and safe operation.
1. Set the program number at ‘0’. The program changes to calibration mode.
2. Push the foot controller to the end. The calibration starts and the display show the calibration process.
3. During normal operation, the calibration will be completed after 5~10 seconds with ‘Success! Calibration OK’
on the screen and beep sounds.
4. When it is completed, Use the product.