Launch
user's guidance
IP address: 192.168.2.99
Subnet mask: 255.255.255.0
Click "Add" and always click "Confirm" as prompted until the setting is completed.
3, the software installation process prompts to install NET Framework 4.0 how to operate?
A: The PCB quick-diagnosis software runs with the NET Framework 4.0 operating environment. If
prompted to install, follow the prompts to install it step by step. After installation, the software can be
used normally.
4. What should I do if the software image has a ghost image?
A: Image ghosting is due to the fact that the position between the dual-lens lens and the detection board
may not be the lowest due to the mounting position of the bracket.
Factors such as the thickness of the board cause the optimal interlaced imaging distance to change. The
image needs to be fine-tuned by the software button, and it can be used normally without any ghosting.
5. Does the software support for the PCB quick-up instrument be upgraded online?
A: Support, if the software of the later version is updated, the user software will receive an automatic
push notification notification.
To upgrade, the user can upgrade the software according to the prompts.
Pls use a power supply, change to 3.8-4.2V.
How to use it? Pls have a look a tthe video on Youtube:
https://www.youtube.com/watch?v=76SPQ3M6kI4&t=113s
https://www.youtube.com/watch?v=E9RbsmScRoU
https://www.youtube.com/watch?v=V7geANCxktQ
