Saeco MAGIC M2, Operation And Maintenance Manual

Page: 67 / 80

English
67
10
Make sure that the brew group is in the off position.
The two reference marks must match.
10101010
If they do not match, proceed as described below:
10
Ensure that the lever is in contact with the brew group
base.
10101010
Make sure that the hook which locks the brew group is
in the correct position. Firmly press the "PUSH"
button to check its position.
10101010
Insert the brew group into its seat again until it locks
into place WITHOUT pressing the "PUSH" button.
10101010
Insert the coffee grounds drawer and the drip tray.
Close the service door.
1010
10.2.11 Brew group lubrication
10
Lubricate the brew group after approximately 500 cups
of coffee or once a month. The grease for lubricating
the coffee unit and the relative accessories can be
purchased from your local dealer or the authorised
support centres.
10
Before lubricating the coffee unit, clean it under
running water as explained in the chapter "Manual
cleaning of the coffee unit".
10
Lubricate the brew group guides using Saeco grease only.
10101010
Apply the grease evenly on both side guides.
10101010