Saeco MAGIC M2, Operation And Maintenance Manual

Page: 64 / 80

English
64
10
Select the rinse of the coffee unit. Confirm the rinse.
The machine dispenses a sufficient quantity of water to
rinse the coffee circuit. The following screen is
displayed:
10101010
This function allows the machine to maintain optimal
hygiene and service conditions, but under no
circumstance should it be considered sufficient as the
only method for cleaning the coffee circuit. Wait until
the cycle stops automatically. The machine will go
back to the normal operating cycle.
1010
10.2.9 Thorough cleaning coffee
unit with "degreasing
tablets".
1010
Besides weekly cleaning, we recommend performing a
cleaning cycle with "Coffee Oil Remover" after
approximately 2 00 cups of coffee or once a month. This
operation completes the maintenance process for the
brew group. The "Degreasing tablets" for cleaning the
coffee unit and the maintenance products can be
purchased from your local dealer or the authorised
support centres.
1010
The "Coffee Oil Remover"
system has no descaling
properties. For descaling,
use the Saeco descaling
solution and follow the
procedure
described in
the "Descaling" chapter.
1010
The wash cycle cannot be interrupted. Do not leave
the machine unattended during this operation.
1010
Access the programming of the machine as described
in the paragraph "Access to the programming menus".
Tap the "menu" icon to view the appliance's menu
functions.
1010101010
Select "Daily actions". Select "Washing/rinsing". Select
the washing of the coffee unit. Select "Washing".
1010101010
Confirm the process. The machine summarizes on the
display all the phases to be performed for the washing
step-by-step. For example, the phases are the following:
1010
Fill the water tank.
10
Remove the drip tray and the coffee grounds drawer.
10101010
Empty the coffee grounds drawer and the drip tray.
10