Saeco MAGIC M2, Operation And Maintenance Manual

Page: 52 / 80

English
52
999
Wait for this cycle to be completed automatically.
99
9.4 Energy Saving mode
9
The machine can be set to energy saving mode. If set
to energy saving mode, after a certain period of
inactivity since the last delivery, the machine turns off
automatically. This period of time is set by the
operator in the programming menu.
99
During the turn-off phase,
the machine will perform a
rinse cycle if a coffee
product has been brewed.
9
Time can be programmed
according to your needs
(see instructions in chapter
"Programming Menu").
99
To restart the machine simply tap the control panel;
the machine will rinse the coffee circuit; the machine
will also rinse the milk circuit if at least one milk
product was dispensed before going into stand-by;
99
9.5 Dispensing beverages coffee
only
9
Insert the cup or glass under the dispenser.
9999
To dispense a coffee beverage touch the icon of the
coffee beverage desired. If the coffee beverages are
not visible on the beverage selection screen, tap the
"COFFEE" icon on the left of the beverage selection
screen in the control column and subsequently tap the
icon of the coffee beverage desired.
99999
Start the dispensing cycle. Once the prebrewing cycle
has been completed, coffee begins to come out of the
dispensing spout. Coffee brewing stops automatically
when the preset level is reached. it is in any case
possible to interrupt the dispensing by tapping the
"STOP" icon.
99999