English
10
72
The machine will now start dispensing the descaling
solution at intervals (the bar shows the cycle progress).
When the solution in the tank is finished, the machine
requests to empty and rinse the tank with fresh drinking
water.
Empty the containers used to collect the liquid dispensed
by the machine.
Rinse the water tank thoroughly and fill it with fresh
drinking water up to the "CALC CLEAN" level.
Remove any liquids from the drip tray and insert it back
into the machine.
Place a large container under the steam/hot water wand
and another one under the coffee dispensing spout.
Insert the tank into the machine.
Press the "Espresso" button; the machine performs the
rinse cycle.
The rinse cycle may be
paused
by
pressing
the
"Espresso"
button.
To
resume the cycle, press the
"Espresso" button again. This
allows you to empty the
container or to leave the
machine unattended for a
short time.
When the amount of water needed for the rinse cycle has been
completely dispensed, this icon is displayed.
Press the "Cappuccino" button to exit the descaling cycle.
The
rinse
cycle
is
performed in order to
have the circuit cleaned
with a preset amount of
water to ensure proper
machine performance. If
the water tank is not filled
up to the CALC CLEAN
level, the machine may
require two or more cycles
to
be
carried
out
by
displaying
the
following
screen.
Once the rinse cycle has been completed, the machine
carries out the circuit priming, the warm-up and rinse
cycle in order to be ready for product brewing.
