English
28
9.1 Beverage dispensing
• Insert the correct amount of change (40) corresponding to the price of the beverage selected.
• If coins inserted (39) exceed the amount required, the surplus amount will be stored for approx. 3 minutes and can be used for
another beverage (with G13 multi-product dispensing coiner).
For G 13 coiner without multi-product dispensing function insert only correct amount of coins. If the equipment is supplied with a
coin changer, the change can be recovered by pressing button (38).
• Take a cup and position it at the dispensing point (34).
• Press the button corresponding to the desired beverage.
• Take the sugar packet out of the sugar dispenser (37) and the stirrer by pressing button (36).
Warning:
Do not remove cup until the green ready light is on again.
9.2 Re-filling products
• As needed, re-fill the instant products, coffee beans, water (if using internal tank), stirrers, cups and sugar packets.
Instant product bins:
• Close bin latches.
• Remove bins (2) from their housing (Fig. 23)
• Fill with instant product; do not exceed 2/3 of the max. capacity of the bins.
• Replace covers and replace bins into their housing, making sure they are properly
positioned (Fig. 13).
Water tank:
• Remove water tank (13) by accessing the top of the machine
• Fill it with fresh, cold water and replace it, making sure it is properly positioned.
Bean hopper:
• Lift the top cover (31) and the hopper cover (47) (Fig. 24) and fill the hopper (1) with
coffee beans.
Fig. 23
Fig. 24
☞
Fig. 25
Fig. 26
Attention:
Do not fill with ground or instant coffee.
Stirrer dispenser:
• Open front door.
• Remove the stirrer container cover (21)
and the metal weight.
• Fill with perfectly aligned stirrers, replace
the weight and the cover (Fig. 25)
• Close door and check proper functioning
by pressing button to dispense a stirrer.
Warning:
The stirrer dispensing device works exclusively with the type of stirrers shown in figure 26. The use of even slightly different
stirrers may cause jamming.
Cup dispenser:
• Place cups in the tubes (20) fitted on the interior side of the door.
9 - OPERATION AND RE-FILLING PRODUCTS
1,3
9,5
90
÷
104
