Saeco CAP030A, Operation And Maintenance

Page: 116 / 324

English
10
116
10.2.2 Manual parts cleaning
Clean the cup-warming surface and machine exterior using
a damp and dry cloth.
For each side of the machine:
• Deep clean all the drawers, as shown below.
• Remove the shelves from their seat and wash them
carefully with running water.
• Clean the spouts with a soft damp cloth.
• Clean the nozzles with a non-abrasive damp cloth.
• Clean the capsule loading compartment, as shown below.
If the spouts or the nozzles are clogged, the final part of
the spouts can be unscrewed and a pin can be used to
unclog both nozzles and spouts.
Cleaning the drip tray and capsule drawers
The capsule drawer is to be emptied and cleaned
whenever indicated by the machine. However, it is
recommended to empty it daily.
In order to avoid any accidental leakage, pay special
attention while handling the drawers.
Cleaning the capsule loading compartment
• Check the state of the capsule loading compartment, and
if necessary clean it with a damp cloth.
Do not use detergents to
clean
the compartment
since it might be difficult to
remove possible residues.
• Check that the tray can freely slide.
Cleaning the left side:
• Open the drip tray and capsule drawer.
• Remove the capsule drawer from its seat, empty and wash
it with running water.
• Wash the drip tray with running water, paying special
attention to the grill.