Saeco CAP020, Operation And Maintenance

Page: 95 / 228

English
8
95
GENERAL SETTING
Technical
WASHING MENU
OPTION
NO.
DISPLAY Description
1. Cappuccinatore Rinsing This function allows dispensing a quantity of steam to avoid the building up of deposits in the
Cappuccinatore.
2. CLEAN BREWING UNIT
This function allows dispensing a minimum quantity of hot water (about 5 cc) to avoid the
building up
of deposits in the coffee dispensing spout.
3. GROUP RINSING This function allows to wash the brew group by using the special tablets
follow instructions (contact an authorised service centre for detailed information on the tablets).
Procedure:
The process starts from “GROUP RINSING”
Press the "Enter" button;
the display shows “PUT THE TABLET INTO THE GROUP”
Remove the brew group;
the display shows “INS. BREW GROUP”
Insert the tablet into the brew group and put the brew group back in its place;
the display shows “CLOSE SERV. DOOR”
Close the door;
the display shows “RINSING”
The machine starts performing a wash cycle. When the cycle is complete the display shows
“REMOVE THE GROUP AND RINSE IT WITH WATER”
Remove the brew group;
the display shows “INS. BREW GROUP”
Wash the group under running water.
Put the brew group back into place;
the display shows “CLOSE SERV. DOOR”
Close the door;
the display shows “RINSING COMPLETED PRESS OK”
Press the “OK” button to definitely quit the menu so that the machine is ready for use
MILK PROGRAMMING
OPTION
NO. DISPLAY Description
1. MILK PROGRAMMING
It allows storing the quantity of milk by pressing the beverage button for a
long time.
(See section “MILK PROGRAMMING”)
Test menu