Saeco Aulika SUP040R, Service Manual

Page: 18 / 56

AULIKA 03 USER GUIDE
Rev. 00 / July 2012 Page / 07
DISPLAY MENU
This function makes it possible to set the language for the menu and the brightness of the display
This setting is fundamental for the correct adjustment of the machine parameters according to the
Country of the user.
The currently selected language is displayed. It is possible to change language using the
appropriate keys.
To set the correct brightness of the display according to the environmental lighting.
To set the correct contrast of the display according to the environmental lighting.
DISPLAY MENU
BRIGHTNESS
CONTRAST
LANGUAGE
ITALIAN
MACHINE MENU Makes it possible to customise the machine functions settings
To change the operating settings of the machine
This function makes it possible to enable/disable the audible warnings
This function makes it possible to set the interval after which the machine shall go to stand-by after
the latest beverage dispensed. The default interval is 30 minutes.
After the expiration of the set interval, the machine goes on stand-by. Press any key to wake the
machine.
After a diagnostic cycle and a heating cycle the machine is again ready for use.
To enable the audible warnings
In this way, when the machine is turned on all the boilers are also turned on, to allow immediate
preparation of all beverages. This entails a higher energy consumption, as the machine is always
ready to use.
In this way the self-learning function is disabled
In this way, when the machine is turned on only the coffee boiler is turned on. The machine uses
less energy, but requires more time to deliver products containing milk.
In this way the self-learning function is enabled; keep a key pressed for 3 seconds to start the
automatic self-learning cycle for the length of the beverage in the cup
To disable the audible warnings
This function manages the activation of the machine boilers, to save energy. This function's default
setting is "ON".
To enable the self-learning function with reference to the length of the dispensed beverages
To set the access PASSWORD for machine programming.
Note: if the PASSWORD is (0000), it shall not be requested during the access procedure.
If you forget the PASSWORD, you need to start a recovery procedure through the
customer service.
GENERAL MENU
SOUND
ECOMODE
SELF-LEARNING
SET PASSWORD
STAND-BY SETTING
OFF
ON
OFF
OFF
ON
ON
15 MINUTES
30 MINUTES
60 MINUTES
180 MINUTES
05