3.7 Battery connection
3.
7.1 Refer to “Battery connection drawing”, installation battery connection accessories and bolts, the torque is less
than 17.5N.m
3.7.2 After connected the battery connection accessories, carefully check the bolts if there is loosening. Note the
spring flat must be flattened.
3.7.3 After installed the rigid connectors, install the rigid connector protection cover. There are two kind of rigid
connector cover, note do not bump and scratch.
Terminal block
fixed plate
Insulation base
placement
Align
the
notches
installation
Note: place direction
is outward
Battery positive
connection
cable