60
12cm
H
5m
H
2
1
Adjusting the headlamps
Adjusting the headlight
- Activate the dipped beam.
- Use the adjusting screw (1 and 2) on
both sides to adjust the angle of the
asymmetrically illuminated surface area
of the road top.
- Release srews (1) and (2), adjust and
tighten up.
NOTE
If you have problems adjusting the head-
lamps, see a specialised SFM dealer.
An incorrect adjustment is punishable by
law. Remember, you are responsible for
the correct adjustment of the motorbike’s
headlamp.
WARNING
Do not run the engine in an enclosed
space (risk of asphyxiation).
Position the motorcycle on a level fl oor 5
m (measured from the headlamp) from a
light coloured wall with a rider seated on
the motorcycle and the tyres fi lled at the
correct pressure.
- Measure the distance from the fl oor to
the centre of the headlamp and mark
the height on the wall with a cross. Draw
a second cross 12 cm beneath the fi rst
cross.
- Star t the motorcycle and r un the
en gine.
NOTES ON MAINTENANCE
