43
2
3
5
1
3
4
Installing the front wheel
CAUTION
Take care not to damage the brake discs
and linings (4) while installing them.
Have a SFM dealer check the tightening
torques.
-
Roll the front wheel in between the fork
tubes and insert the spacer bush (4) (on
the right as seen from the riding direc-
tion).
-
Grease the full fl oating axle (3) and push
it in with the spacer bushing (5) as far as
it will go.
-
Attach the axle nut (2) and screw tight.
-
Before tightening the screw (1) stand the
motorbike on its wheels and push the
telescopic forks several times to prevent
twisting of the fork struts.
Torque
Axle nut (2):
35-45 Nm
Axle locking screws (1):
10 Nm
NOTES ON MAINTENANCE
