57
1
2
3
4
4
5
6
7
Changing the bulbs
NOTE
Use only tested, incandescent bulbs with
the ‘E’ designation. Use of non-approved
bulbs will void the operating license. Do
not touch the bulbs with bare fi ngers. Hold
bulbs with a clean, dry cloth when installing
or re mov ing them.
Headlight
1 = low beam
bulb
12V 55W E1
2 = High beam
bulb
12V 55W E1
3 = Position light
bulb
12V/5W
-
Remove the screws (4) on both sides.
-
Detach the rubber cover (5) from the
headlight case.
-
Release the holder clamp (6) and remove
the bulb (7).
-
Pull the position light (3) with the bulb
holder carefully out of the headlight
housing.
Installation takes place in reverse order to
disassembly.
NOTES ON MAINTENANCE
